按品牌選擇
 |
|
|||||||||||||||||||||||||||||||||
| [發表評論] [本類其他產品] [本類其他供應商] [收藏] | ||||||||||||||||||||||||||||||||||
| 銷售商： 武漢費斯德生物科技有限公司 | 查看該公司所有產品 >> |
** 本公司銷售的所有產品僅供實驗科研使用，不用于人體及臨床診斷
產品說明：https://www.neweastwuhan.com/product/rab3-pull_down/
Rab3 Pull-Down Activation Assay Kit
Cat. # 82601
IntroductionA. Background
Rab3 is a member of the Rab-family GTPases and is specifically targeted to synaptic vesicles Currently there is no direct assay to measure the activation of Rab3 GTPases.
The Rab3 Activation Assay Kit is based on the configuration-specific monoclonal antibody that specifically recognizes Rab3-GTP, but not Rab3-GDP. Given the high affinity of monoclonal antibodies to their antigens, the activation assay could be performed in a short time. This assay provides the reliable results with consistent reproducibility.
Currently there is no direct assay to measure the activation of Rab3 GTPases.
B. Assay Principle
The Rap1 Activation Assay Kit uses configuration-specific anti-Rab3-GTP Mouse monoclonal antibody to measure Rab3-GTP levels in cell extracts or in vitro GTPγS loading Rab3 activation assays. Anti-Rab3-GTP mouse monoclonal antibody is first incubated with cell lysates containing Rab3-GTP. Next, the GTP-bound Rab3 is pulled down by protein A/G agarose. Finally, the precipitated Rab3-GTP is detected through immunoblot analysis using Anti-Rab3A Rabbit Polyclonal Antibody.
C. Kit Components
1. Anti-Rab3-GTP Mouse Monoclonal Antibody (Cat. # 26920): One vial – 35 µL (1 mg/ml) in PBS, pH 7.4, containing 50% glycerol. This antibody specifically recognizes Rab3-GTP from all vertebrates.
2. Protein A/G Agarose (Cat. # 30301): One vial – 600 µL of 50% slurry.
3. 5X Assay/Lysis Buffer (Cat. # 30302): One bottle – 30 mL of 250 mM Tris-HCl, pH 8, 750 mM NaCl, 50 mM MgCl2, 5 mM EDTA, 5% Triton X-100.
4. Anti-Rab3A Rabbit Polyclonal Antibody (Cat. # 21041): One vial – 50 µL (1 mg/mL) in PBS, pH 7.4, contained 50% glycerol.
5. 100X GTPγS (Cat. # 30303): One vial – 50 µl at 10 mM, use 5 µL of GTPγS for GTP-labeling of 0.5 mL of cell lysate.
6. 100X GDP (Cat. # 30304): One vial – 50 µl at 100 mM, use 5 µL of GDP for GDP-labeling of 0.5 mL of cell lysate.
7. HRP-Goat Anti-Rabbit IgG (Cat. #29002): 50 µL (0.4 mg/mL) in PBS, pH 7.4, contained 50% glycerol.
D. Materials Needed but Not Supplied
1. Stimulated and non-stimulated cell lysates
2. Protease inhibitors
3. 4 °C tube rocker or shaker
4. 0.5 M EDTA at pH 8.0
5. 1.0 M MgCl2
6. 2X reducing SDS-PAGE sample buffer
7. Electrophoresis and immunoblotting systems
8. Immunoblotting wash buffer such as TBST (10 mM Tris-HCl, pH 7.4, 0.15 M NaCl, 0.05% Tween-20)
9. Immunoblotting blocking buffer (TBST containing 5% Non-fat Dry Milk or 3% BSA)
10. ECL Detection Reagents
E. Example Results
The following figure demonstrates example results seen with the Rab3 Activation Assay Kit. For reference only.
Rab3A Activation Assay.Purified GST-tagged Rab3A proteins (Cat. #10128) were immunoprecipitated with the anti-Rab3-GTP monoclonal antibody (Cat. #. 26920) after treated with GDP (lane 1) or GTPγS (lane 2), and was blotted with anti-Rab3A polyclonal antibody (Cat. # 21041). Input control is shown in the bottom panel.A. Reagent Preparation
1X Assay/Lysis Buffer: Mix the 5X Stock (Cat. # 30301) briefly and dilute to 1X in deionized water. Just prior to usage, add protease inhibitors such as 1 mM PMSF, 10 µg/mL leupeptin, or 10 µg/mL aprotinin.
B. Sample Preparation
Adherent Cells
1. Culture cells (one 10-cm plate, ~107 cells) to approximately 80-90% confluence. Stimulate the cells with activator or inhibitor as desired.
2. Aspirate the culture media and wash twice with ice-cold PBS.
3. Completely remove the final PBS wash and add ice-cold 1X Assay/Lysis Buffer (See Reagent Preparation) to the cells (0.5-1 mL per 10 cm tissue culture plate).
4. Place the culture plates on ice for 10-20 minutes.
5. Detach the cells from the plates by scraping with a cell scraper.
6. Transfer the lysates to appropriate size tubes and place on ice.
7. If nuclear lysis occurs, the cell lysates may become viscous and difficult to pipette. If this occurs, lysates can be passed through a 27½-gauge syringe needle 3-4 times to shear the genomic DNA.
8. Clear the lysates by centrifuging at 12,000 x g and 4°C for 10 minutes.
9. Collect the supernatant and store the sample (~1-2 mg of total protein) on ice for immediate use, or snap freeze and store at -70°C for future use.
Adherent Cells
1. Culture cells and stimulate with activator or inhibitor as desired.
2. Perform a cell count and then pellet the cells through centrifugation.
3. Aspirate the culture media and wash twice with ice-cold PBS.
4. Completely remove the final PBS wash and add ice-cold 1X Assay/Lysis Buffer (See Reagent Preparation) to the cell pellet (0.5-1 mL per 107 cells).
5. Lyse the cells by repeated pipetting.
6. Transfer the lysates to appropriate size tubes and place them on ice.
7. If nuclear lysis occurs, the cell lysates may become viscous and difficult to pipette. If this occurs, lysates can be passed through a 27½-gauge syringe needle 3-4 times to shear the genomic DNA.
8. Clear the lysates by centrifuging at 12,000 x g and 4°C for 10 minutes.
9. Collect the supernatant and store sample on ice for immediate use, or snap freeze and store at -70°C for future use.
C. In vitro GTPγS/GDP Protein for Positive and Negative controls
Note: In vivo stimulation of cells will activate approximately 10% of the available Rab3A, whereas in vitro GTPγS protein loading will activate nearly 90% of Rab3A.
1. Aliquot 0.5 mL of cell extract (or 1 µg of purified Rab3A protein) into two microcentrifuge tubes.
2. To each tube, add 20 µL of 0.5 M EDTA (final concentration of 20 mM).
3. Positive control: add 5 µL of 100 X GTPγS (Cat. # 30302) to the 1st tube
4. Negative control: add 5 µL of 100 X GDP (Cat. # 30304) to the 2nd tube.
5. Incubate both tubes at 30°C for 30 minutes with agitation.
6. Stop loading by placing the tubes on ice and adding 32.5 µL of 1 M MgCl2 (final concentration of 60 mM).
D. Affinity Precipitation of Activated G Protein
1. Aliquot 0.5-1 mL of cell lysates (about 1 mg of total cellular protein) to a microcentrifuge tube.
2. Adjust the volume to 1 mL with 1X Assay/Lysis Buffer (See Reagent Preparation).
3. Add 1 µL anti-Rab3-GTP antibody (Cat. # 26920).
4. Prepare the protein A/G Agarose bead slurry (Cat. # 30301) by resuspending through vertexing or titrating.
5. Quickly add 20 µL of resuspended bead slurry to above tube.
6. Incubate the tube at 4°C for 1 hour with gentle agitation.
7. Pellet the beads through centrifugation at 5,000 x g for 1 min.
8. Aspirate and discard the supernatant (making sure not to disturb or remove the bead pellet.
9. Wash the beads 3 times with 0.5 mL of 1X Assay/Lysis Buffer, centrifuging and aspirating each time.
10. After the third wash, pellet the beads through centrifugation and carefully remove all the supernatant.
11. Resuspend the bead pellet in 20 µL of 2X reducing SDS- PAGE sample buffer.
12. Boil the sample for 5 minutes.
13. Centrifuge it at 5,000 x g for 10 seconds.
E. Western Blot Analysis
1. Load 15 µL/well of pull-down supernatant to a polyacrylamide gel (17%). It is recommended to include a pre-stained MW standard (as an indicator of a successful transfer in step 3 below).
2. Perform SDS-PAGE following the manufacturer’s instructions.
3. Transfer the gel proteins to a PVDF or nitrocellulose membrane following the manufacturer’s instructions.
Note: Steps 4-11 are at room temperature with agitation
4. Following electroblotting, immerse the PVDF membrane in 100% Methanol for 15 seconds, and then allow it to dry at room temperature for 5 minutes.
Note: If Nitrocellulose is used instead of PVDF, step 4 Should be skipped.
5. Block the membrane with 5% non-fat dry milk or 3% BSA in TBST for 1 hr at room temperature with constant agitation.
6. Wash the blotted membrane three times with TBST, 5 minutes each time.
7. Incubate the membrane with Anti-Rab3A Rabbit Polyclonal Antibody (Cat. # 21041), which is freshly diluted 1: 50~500 (depending on the amount of Rab3 proteins in your sample) in 5% non-fat dry milk or 3% BSA in TBST, for 1-2 hr at room temperature with constant agitation or at 4°C overnight.
8. Wash the blotted membrane three times with TBST, 5 minutes each time.
9. Incubate the membrane with a secondary antibody (Cat. # 29002), which is freshly diluted 1: 1000 in 5% non-fat dry milk or 3% BSA in TBST, for 1 hr at room temperature with constant agitation.
10. Wash the blotted membrane three times with TBST, 5 minutes each time.
11. Use the detection method of your choice such as ECL.
美國NewEast Biosciences品牌國內總經銷處，購買正品品牌產品，質量保證，為您的實驗和科研成果負責
僅供科研使用，如有單位或個人將本公司銷售產品用于臨床診斷、治療等國家專門規定的或企業自行規定的特殊用途，本公司概不承擔任何責任。
如使用過程中發現確屬于產品本身質量問題，請在收到貨后的20天內告知我們并提供真實的書面報告，我們會及時的幫您解決，逾期不再受理，視為合格！所有形式的賠償和退換僅限于產品本身，不涉及任何其他
僅供科研使用，如有單位或個人將本公司銷售產品用于臨床診斷、治療等國家專門規定的或企業自行規定的特殊用途，本公司概不承擔任何責任。
如使用過程中發現確屬于產品本身質量問題，請在收到貨后的20天內告知我們并提供真實的書面報告，我們會及時的幫您解決，逾期不再受理，視為合格！所有形式的賠償和退換僅限于產品本身，不涉及任何其他
手機版：Rab3 活性檢測試劑盒
Copyright(C) 1998-2025 生物器材網 電話：021-64166852;13621656896 E-mail：info@bio-equip.com